High Strength Alloy Steel Rod Ends

$4.44$14.67

Clear

High Strength Alloy Steel Rod Ends

Share on email
Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
SKU BBEM Category

BBEM: HIGH STRENGTH ALLOY STEEL 2 PIECE

Call Rod End Supply inside sales personnel at 1-800-284-2902 with your specific application needs.

BBEM alloy stell rod end
BBEM
BALL BODY
52100 BEARING STEEL 4130 CHROMOLY STEEL
PRECISION GROUND HEAT TREATED
HEAT TREATED BLACK OXIDE COATED
HARD CHROME PLATED

CAUTIONS

  1. Lubrication Required: To insure proper function, the rod ends listed below must be lubricated. To insure complete lubrication, before installation, rotate ball bore 90 to installed position, fill housing with high-quality grease. Restore ball bore to installed position, wipe off excess grease and install.
  2. Lubricants may attract dirt and other abrasive contamination. Rod ends must be removed, thoroughly cleaned, inspected, and re-greased whenever contamination of any kind is present.
  3. Do not install any component listed here, on this site or in our catalog before you READ, UNDERSTAND AND ACCEPT THE WARNINGS.
  4. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

NOTES

  1. FOR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: BBEML12
  2. FOR STUDS ADD “Y” TO SUFFIX. EXAMPLE: BBEM12Y
  3. FOR TEFLON LINER ADD “T” TO SUFFIX. EXAMPLE: BBEM12T

BBEM ROD ENDS

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0025 -.0005 D DIA. +.010 -.010 W WIDTH + .005 – .005 T WIDTH REF. BALL DIA. REF. AM LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 A MIS. ANG. REF. ULT. STATIC RADIAL LOAD (LBS.) APPROX. WEIGHT (LBS.)
BBEM 5 5/16X5/16-24 .3125 .875 .437 .312 .625 1.875 5/16-24 1.250 22 7,100 .07
BBEM 6 3/8X3/8-24 .3750 1.000 .500 .359 .719 1.938 3/8-24 1.250 22 10,500 .11
BBEM 7 7/16X7/16-20 .4375 1.125 .562 .406 .812 2.125 7/16-20 1.375 21 12,650 .15
BBEM 8 1/2X1/2-20 .5000 1.312 .625 .453 .937 2.438 1/2-20 1.500 20 17,000 .24
BBEM 10 5/8X5/8-18 .6250 1.500 .750 .484 1.125 2.625 5/8-18 1.625 26 18,000 .36
BBEM 12 3/4X3/4-16 .7500 1.750 .875 .593 1.312 2.875 3/4-16 1.750 24 25,000 .57

HEAVY DUTY SHANK

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0025 -.0005 D DIA. +.010 -.010 W WIDTH + .005 – .005 T WIDTH REF. BALL DIA. REF. AM LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 A MIS. ANG. REF. ULT. STATIC RADIAL LOAD (LBS.) APPROX. WEIGHT (LBS.)
BBEM 8-10 1/2X5/8-18 .5000 1.500 .625 .453 .937 2.625 5/8-18 1.625 26 19,300 .30
BBEM 10-13 5/8X3/4-16 .6250 1.750 .750 .484 1.125 2.875 3/4-16 1.750 24 27,000 .48
0/5 (0 Reviews)

HIGH STRENGTH ALLOY STEEL

Ball Specs:

  • 52100 Bearing Steel
  • Precision Ground
  • Heat Treated
  • Hard Chrome Plated

Body Specs:

  • 4130 Chromoly Steel
  • Heat Treated
  • Black Oxide Coated