Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

All Aluminum Self-Lubricating Nylafiber Matrix Race

$12.96$18.29

Part No. AAM Category

Subtotal:

Add-ons total:

Total:

All Aluminum Self-Lubricating Nylafiber Matrix Race

SKU AAM Category

ALUMINUM – SELF-LUBRICATING
& SELF SEALING NYLAFIBER MATRIX RACE

AAM

Call Rod End Supply inside sales personnel at 1-800-284-2902 with your specific application needs.

AM Rod End
AAM
BALL RACE BODY
ALUMINUM INJECTION 7075-T6
PRECISION GROUND MOLDED ALUMINUM
HEAT TREATED NYLAFIBER CLEAR ANODIZED
HARD CHROME PLATED MATRIX

CAUTIONS

  1. DO NOT LUBRICATE: The rod ends listed below are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
  2. Do not install any component listed here, on this site or in our catalog before you READ, UNDERSTAND AND ACCEPT THE WARNINGS.
  3. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

NOTES

  1. FOR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE:AML12 *Right Hand Only
  2. FOR STUDS ADD “Y” TO SUFFIX. EXAMPLE: AM12Y

AM, AF ROD ENDS: ALUMINUM – SELF-LUBRICATING & SELF SEALING NYLAFIBER MATRIX RACE

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0015 -.0005 D DIA. +.010 -.010 W WIDTH + .000  – .005 T WIDTH + .005  – .005 BALL DIA.
REF.
AM LGTH. -.015 +.015 AF LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 CF LGTH. +0.62 -.031 E DIA. -.010 +.010 F WRENCH FLAT +.010 -.010 A MIS. ANG. REF. ULT. STATIC RADIAL LOAD(LBS.) APPROX. WEIGHT
(LBS.)
AM 3 3/16×10-32 .1900 .625 .312 .250 .437 1.250 10-32 .750 .406 13 1350 .02
AF 3 3/16×10-32 .1900 .625 .312 .250 .437 1.062 10-32 .562 .406 .312 13 1750 .03
AM4 1/4×1/4-28 .2500 .750 .375 .281 .500 1.562 1/4-28 1.000 .469 16 2500 .03
AF 4 1/4×1/4-28 .2500 .750 .375 .281 .500 1.312 1/4-28 .750 .469 .375 16 2900 .04
AM 5 5/16×5/16-24 .3125 .875 .437 .344 .625 1.875 5/16-24 1.250 .500 14 3200 .05
AF 5 5/16×5/16-24 .3125 .875 .437 .344 .625 1.375 5/16-24 .750 .500 .437 14 3600 .06
AM 6 3/8×3/8-24 .3750 1.000 .500 .406 .719 1.938 3/8-24 1.125 .687 12 4500 .05
AF 6  3/8×3/8-24 .3750 1.000 .500 .406 .719 1.625 3/8-24 .937 .687 .562 12 4500 .07
AM 7 7/16×7/16-20 .4375 1.125 .562 .437 .812 2.125 7/16-20 1.375 .750 14 4800 .09
AF 7 7/16×7/16-20 .4375 1.125 .562 .437 .812 1.812 7/16-20 1.062 .750 .625 14 10285 .10
AM 8 1/2×1/2-20 .5000 1.312 .625 .500 .937 2.438 1/2-20 1.500 .875 12 7700 .12
AF 8 1/2×1/2-20 .5000 1.312 .625 .500 .937 2.125 1/2-20 1.187 .875 .750 12 7700 .14
AM 10 5/8×5/8-18 .6250 1.500 .750 .562 1.125 2.625 5/8-18 1.625 1.000 16 8600 .18
AM 12 3/4×3/4-16 .7500 1.750 .875 .687 1.312 2.785 3/4-16 1.750 1.125 14 13400 .29

HEAVY DUTY SHANK

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0015 -.0005 D DIA. +.010 -.010 W WIDTH + .000   – .005 T WIDTH + .005   – .005 BALL DIA.
REF.
AM LGTH. -.015 +.015 AF LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 CF LGTH. +0.62 -.031 E DIA. -.010 +.010 F WRENCH FLAT +.010 -.010 A MIS. ANG. REF. ULT. STATIC RADIAL LOAD(LBS.) APPROX. WEIGHT
(LBS.)
AM 5-6 5/16×3/8-24 .3125 1.000 .437 .344 .625 1.938 3/8-24 1.250 12 5800 .05
AM 6-7 3/8×7/16-20 .3750 1.125 .500 .406 .719 2.125 7/16-20 1/375 10 7800 .09
AM 7-8 7/16×1/2-20 .4375 1.312 .562 .437 .812 2.438 1/2-20 1.500 12 11100 .13
AM 8-10 1/2×5/8-18 .5000 1.500 .625 .500 .937 2.625 5/8-18 1.625 10 15000 .18
AM 10-12 5/8×3/4-16 .6250 1.750 .750 .562 1.125 2.875 3/4-16 1.750 13 19300 .30
*AM 6-8 3/8×1/2-20 .3750 1.312 .625 .500 .937 2.438 1/2-20 1.500 12 11100 .13
*AM 6-10 3/8×5/8-18 .3750 1.500 .625 .500 .937 2.625 5/8-18 1.625 13 15000 .18

CAUTIONS

  1. DO NOT LUBRICATE: The rod ends listed below are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
  2. Do not install any component listed here, on this site or in our catalog before you READ, UNDERSTAND AND ACCEPT THE WARNINGS.
  3. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

NOTES

  1. FOR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE:AML12 *Right Hand Only
  2. FOR STUDS ADD “Y” TO SUFFIX. EXAMPLE: AM12Y