em-ef-rodends1.png
emef-lineart.png
em-ef-economy-rodend.jpg

Economy Series Rod Ends

Price range: $3.16 through $13.24

Part No. EM Categories ,

Add Studs to Rod Ends

Subtotal:

Add-ons total:

+ 

Total:

Economy Series Rod Ends

SKU EM Categories ,

EM, EF: Economy Series & Steering Rod End

Call Rod End Supply inside sales personnel at 1-800-284-2902 with your

specific application needs.

EM Rod end
EM
BALL BODY
52100 BEARING STEEL C1045 STEEL
PRECISION GROUND HEAT TREATED
HEAT TREATED ZINC PLATED
HARD CHROME PLATED
EF

CAUTIONS

  1. Lubrication Required: To insure proper function, the rod ends listed

    below must be lubricated. To insure complete lubrication, before

    installation, rotate ball bore 90 to installed position, fill housing with

    high-quality grease. Restore ball bore to installed position, wipe off

    excess grease and install.

  2. Lubricants may attract dirt and other abrasive contamination. Rod ends

    must be removed, thoroughly cleaned, inspected, and re-greased whenever

    contamination of any kind is present.

  3. Do not install any component listed here, on this site or in our

    catalog before you READ, UNDERSTAND AND ACCEPT THE

    WARNINGS.

  4. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

NOTES

  1. FOR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: EML12
  2. FOR STUDS ADD “Y” TO SUFFIX. EXAMPLE: EM6Y
  3. FOR TEFLON LINER ADD “T” TO SUFFIX. EXAMPLE: EM12T

EM EF ROD ENDS

RES PART NO. BORE

X THD.

SIZE

REF.

 B

DIA. +.0025 -.0005

 D

DIA. +.010 -.010

 W WIDTH + .005 – .005 T WIDTH

REF.

 BALL DIA.

REF.

 AM LGTH. -.015 +.015 AF LGTH. -.015 +.015 N

THD. UNF. 3A-2B

 CM LGTH. +.062 -.031 CF LGTH. +0.62 -.031 E

DIA. -.010 +.010

 F

FLAT -.010 +.010

 A

MIS. ANG. REF.

 ULT. STATIC RADIAL LOAD(LBS.) APPR. WT.

(LBS.)
EM 3 3/16×10-32 .1900 .625 .312 .234 .437 1.250 – 10-32 .750 – – – 20 2,074 .03
EF 3 3/16×10-32 .1900 .625 .312 .250 .437 – 1.062 10-32 – .500 .406 .312 20 2,079 .04
EM 4 1/4×1/4-28 .2500 .750 .375 .250 .500 1.562 – 1/4-28 1.000 – – – 27 3,820 .04
EF 4 1/4×1/4-28 .2500 .750 .375 .281 .500 – 1.312 1/4-28 – .687 .469 .375 27 3,820 .05
EM 5 5/16×5/16-24 .3125 .875 .437 .312 .625 1.875 – 5/16-24 1.250 – – – 22 5,110 .07
EF 5 5/16×5/16-24 .3125 .875 .437 .312 .625 – 1.375 5/16-24 – .687 .500 .437 22 5,110 .08
EM 6 3/8×3/8-24 .3750 1.000 .500 .359 .719 1.938 – 3/8-24 1.250 – – – 22 7,605 .11
EF 6 3/8×3/8-24 .3750 1.000 .500 .359 .719 – 1.625 3/8-24 – .812 .687 .562 22 7,605 .13
EM 7 7/16×7/16-20 .4375 1.125 .562 .406 .812 2.125 – 7/16-20 1.375 – – – 21 9,122 .15
EF 7 7/16×7/16-20 .4375 1.125 .562 .406 .812 – 1.812 7/16-20 – .937 .750 .625 21 9,122 .18
EM 8 1/2×1/2-20 .5000 1.312 .625 .453 .937 2.438 – 1/2-20 1.500 – – – 20 12,224 .24
EF 8 1/2×1/2-20 .5000 1.312 .625 .453 .937 – 2.125 1/2-20 – 1.062 .875 .750 20 12,224 .29
EM 10 5/8×5/8-18 .6250 1.500 .750 .484 1.125 2.625 – 5/8-18 1.625 – – – 26 13,540 .36
EF 10 5/8×5/8-18 .6250 1.500 .750 .484 1.125 – 2.500 5/8-18 – 1.375 1.000 .875 26 13,540 .43
EM 12 3/4×3/4-16 .7500 1.750 .875 .593 1.312 2.785 – 3/4-16 1.750 – – – 24 18,810 .57
EF 12 3/4×3/4-16 .7500 1.750 .875 .593 1.312 – 2.875 3/4-16 – 1.562 1.125 1.000 24 18,810 .65

HEAVY DUTY SHANK

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0025 -.0005 D DIA. +.010 -.010 W WIDTH + .005 – .005 T WIDTH

REF.

 BALL DIA.

REF.

 AM LGTH. -.015 +.015 AF LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 CF LGTH. +0.62 -.031 E DIA. -.010 +.010 F FLAT -.010 +.010 A MIS. ANG. REF. ULT. STATIC RADIAL LOAD(LBS.) APPROX. WEIGHT

(LBS.)
EM 3-4 3/16×1/4-28 .1900 .750 .312 .234 .437 1.562 – 1/4-28 1.000 – – – 20 4,824 .04
EM 4-5 1/4×5/16-24 .2500 .875 .375 .250 .500 1.875 – 5/16-24 1.250 – – – 27 6,534 .06
EM 5-6 5/16×3/8-24 .3125 1.000 .437 .312 .625 1.938 – 3/8-24 1.250 – – – 22 7,920 .10
EM 6-7 3/8×7/16-20 .3750 1.125 .500 .359 .719 2.125 – 7/16-20 1.375 – – – 22 9,486 .14
EM 6-8 3/8×1/2-20 .3750 1.125 .500 .359 .719 2.125 – 1/2-20 1.375 – – – 22 9,486 .17
EM 7-8 7/16×1/2-20 .4375 1.312 .562 .406 .812 2.438 – 1/2-20 1.500 – – – 21 12,816 .22
EM 8-10 1/2×5/8-18 .5000 1.500 .625 .453 .937 2.625 – 5/8-18 1.625 – – – 26 15,804 .34
EM 8-12  1/2×3/4-16 .5000 1.500  .750  .484  1.125  2.625 –  3/4-16  1.625 – – – 24 15,804 .42
EM 10-12  5/8×3/4-16 .6250 1.750  .750 .484  1.125 2.875 – 3/4-16  1.750 – – – 24 19,350 .51

STEERING ROD ENDS

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0025 -.0005 D DIA. +.010 -.010 W WIDTH + .005 – .005 T WIDTH

REF.

 BALL DIA.

REF.

 AM LGTH. -.015 +.015 AF LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 CF LGTH. +0.62 -.031 E DIA. -.010 +.010 F FLAT -.010 +.010 A MIS. ANG. REF. ULT. STATIC RADIAL LOAD(LBS.) APPROX. WEIGHT

(LBS.)
EM10Z-102 5/8×5/8 .6250 1.750 .875 .593 1.312 2.625 – 5/8-18 1.750 – – – 24 15,000 .48
EMR12-.757 .757×3/4 .7570 1.750 .875 .593 1.312 2.875 – 3/4-16 1.750 – – – 24 18,810 .57

Related products

BALL

52100 BEARING STEEL

PRECISION GROUND

HEAT TREATED

HARD CHROME PLATED

BODY

C1045 STEEL

HEAT TREATED

ZINC PLATED