Description
BBEM: HIGH STRENGTH ALLOY STEEL 2 PIECE
Call Rod End Supply inside sales personnel at 1-800-284-2902 with your specific application needs.
![]() |
![]() |
|||||||||||
BBEM |
|
CAUTIONS
- Lubrication Required: To insure proper function, the rod ends listed below must be lubricated. To insure complete lubrication, before installation, rotate ball bore 90 to installed position, fill housing with high-quality grease. Restore ball bore to installed position, wipe off excess grease and install.
- Lubricants may attract dirt and other abrasive contamination. Rod ends must be removed, thoroughly cleaned, inspected, and re-greased whenever contamination of any kind is present.
- Do not install any component listed here, on this site or in our catalog before you READ, UNDERSTAND AND ACCEPT THE WARNINGS.
- DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.
NOTES
- FOR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: BBEML12
- FOR STUDS ADD “Y” TO SUFFIX. EXAMPLE: BBEM12Y
- FOR TEFLON LINER ADD “T” TO SUFFIX. EXAMPLE: BBEM12T
BBEM ROD ENDS
RES PART NO. | BORE X THD. SIZE REF. | B DIA. +.0025 -.0005 | D DIA. +.010 -.010 | W WIDTH + .005 – .005 | T WIDTH REF. | BALL DIA. REF. | AM LGTH. -.015 +.015 | N THD. UNF. 3A-2B | CM LGTH. +.062 -.031 | A MIS. ANG. REF. | ULT. STATIC RADIAL LOAD (LBS.) | APPROX. WEIGHT (LBS.) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
BBEM 5 | 5/16X5/16-24 | .3125 | .875 | .437 | .312 | .625 | 1.875 | 5/16-24 | 1.250 | 22 | 7,100 | .07 | |
BBEM 6 | 3/8X3/8-24 | .3750 | 1.000 | .500 | .359 | .719 | 1.938 | 3/8-24 | 1.250 | 22 | 10,500 | .11 | |
BBEM 7 | 7/16X7/16-20 | .4375 | 1.125 | .562 | .406 | .812 | 2.125 | 7/16-20 | 1.375 | 21 | 12,650 | .15 | |
BBEM 8 | 1/2X1/2-20 | .5000 | 1.312 | .625 | .453 | .937 | 2.438 | 1/2-20 | 1.500 | 20 | 17,000 | .24 | |
BBEM 10 | 5/8X5/8-18 | .6250 | 1.500 | .750 | .484 | 1.125 | 2.625 | 5/8-18 | 1.625 | 26 | 18,000 | .36 | |
BBEM 12 | 3/4X3/4-16 | .7500 | 1.750 | .875 | .593 | 1.312 | 2.875 | 3/4-16 | 1.750 | 24 | 25,000 | .57 |
HEAVY DUTY SHANK
RES PART NO. | BORE X THD. SIZE REF. | B DIA. +.0025 -.0005 | D DIA. +.010 -.010 | W WIDTH + .005 – .005 | T WIDTH REF. | BALL DIA. REF. | AM LGTH. -.015 +.015 | N THD. UNF. 3A-2B | CM LGTH. +.062 -.031 | A MIS. ANG. REF. | ULT. STATIC RADIAL LOAD (LBS.) | APPROX. WEIGHT (LBS.) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
BBEM 8-10 | 1/2X5/8-18 | .5000 | 1.500 | .625 | .453 | .937 | 2.625 | 5/8-18 | 1.625 | 26 | 19,300 | .30 | |
BBEM 10-13 | 5/8X3/4-16 | .6250 | 1.750 | .750 | .484 | 1.125 | 2.875 | 3/4-16 | 1.750 | 24 | 27,000 | .48 |