Steel PM – PF Rod Ends

PM, PF: MILD STEEL

Call Rod End Supply inside sales personnel at 1-800-284-2902 with your
specific application needs.

PM rod end PF rod end
PM
BALL RACE BODY
52100 BEARING STEEL STAINLESS LOW CARBON STEEL
PRECISION GROUND STEEL CHROME PLATED
HEAT TREATED    
HARD CHROME PLATED    
PF

CAUTIONS

  1. Lubrication Required: To insure proper function, the rod ends listed
    below must be lubricated. To insure complete lubrication, before
    installation, rotate ball bore 90 to installed position, fill housing with
    high-quality grease. Restore ball bore to installed position, wipe off
    excess grease and install.
  2. Lubricants may attract dirt and other abrasive contamination. Rod ends
    must be removed, thoroughly cleaned, inspected, and re-greased whenever
    contamination of any kind is present.
  3. Do not install any component listed here, on this site or in our
    catalog before you READ, UNDERSTAND AND ACCEPT THE
    WARNINGS
    .
  4. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

NOTES

  1. FOR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: PML4
  2. FOR STUDS ADD “Y” TO SUFFIX. EXAMPLE: PM6Y
  3. FOR TEFLON LINER ADD “T” TO SUFFIX. EXAMPLE: PM12T

PM PF ROD ENDS

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0015 -.0005 D DIA. +.010 -.010 W WIDTH + .000 – .005 T WIDTH + .005 – .005 BALL DIA.
REF.
AM LGTH. -.015 +.015 AF LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 CF LGTH. +0.62 -.031 E DIA. -.010 +.010 F  FLAT +.010 -.010 a MIS. ANG. REF. ULT. STATIC RADIAL LOAD(LBS.) APPROX. WEIGHT
(LBS.)
PM 3 3/16×10-32 .1900 .625 .312 .250 .437 1.250 10-32 .750 13 1,169 .03
PF 3 3/16×10-32 .1900 .625 .312 .250 .437 1.062 10-32 .562 .406 .312 13 1,531 .04
PM 4 1/4×1/4-28 .2500 .750 .375 .281 .500 1.562 1/4-28 1.000 16 2,158 .04
PF 4 1/4×1/4-28 .2500 .750 .375 .281 .500 1.312 1/4-28 .750 .469 .375 16 2,539 .06
PM 5 5/16×5/16-24 .3125 .875 .437 .344 .625 1.875 5/16-24 1.250 14 2,784 .07
PF 5 5/16×5/16-24 .3125 .875 .437 .344 .625 1.375 5/16-24 .750 .500 .437 14 3,133 .09
PM 6 3/8X3/8-24 .3750 1.000 .500 .406 .719 1.938 3/8-24 1.250 12 3,915 .11
PF 6 3/8X3/8-24 .3750 1.000 .500 .406 .719 1.625 3/8-24 .937 .687 .562 12 3,915 .15
PM 7 7/16X7/16-20 .4375 1.125 .562 .437 .812 2.125 7/16-20 1.375 14 4,218 .16
PF 7 7/16X7/16-20 .4375 1.125 .562 .437 .812 1.812 7/16-20 1.062 .750 .625 14 4,218 .20
PM 8 1/2X1/2-20 .5000 1.312 .625 .500 .937 2.438 1/2-20 1.500 12 6,660 .24
PF 8 1/2X1/2-20 .5000 1.312 .625 .500 .937 2.125 1/2-20 1.187 .875 .750 12 6,660 .33
PM 10 5/8X5/8-18 .6250 1.500 .750 .562 1.125 2.625 5/8-18 1.625 16 7,364 .37
PF 10 5/8X5/8-18 .6250 1.500 .750 .562 1.125 2.500 5/8-18 1.500 1.000 .875 16 7,364 .48
PM 12 3/4X3/4-16 .7500 1.750 .875 .687 1.312 2.875 3/4-16 1.750 14 11,518 .60
PF 12 3/4X3/4-16 .7500 1.750 .875 .687 1.312 2.875 3/4-16 1.750 1.125 1.000 14 11,518 .72
PM 14 7/8X7/8-14 .8750 2.000 .875 .765 1.375 3.375 7/8-14 2.000 7 18,476 .92
PF 14 7/8X7/8-14 .8750 2.000 .875 .765 1.375 3.375 7/8-14 1.875 1.300 1.125 7 18,476 1.03
PM 16-1 1/1-14 1.000 2.750 1.375 1.000 1.875 4.125 1-14 2.125 17 43,541 2.13
PF 16-1 1/1-14 1.000 2.750 1.375 1.000 1.875 4.125 1-14 2.125 1.625 1.500 17 43,541 2.41

HEAVY DUTY SHANK

RES PART NO. BORE X THD. SIZE REF. B DIA. +.0015 -.0005 D DIA. +.010 -.010 W WIDTH + .000 – .005 T WIDTH + .005 – .005 BALL DIA.
REF.
AM LGTH. -.015 +.015 Af LGTH. -.015 +.015 N THD. UNF. 3A-2B CM LGTH. +.062 -.031 CF LGTH. +0.62 -.031 E DIA. -.010 +.010 F WRENCH FLAT .010 a MIS. ANG. REF. ULT. STATIC RADIAL LOAD(LBS.) APPROX. WEIGHT
(LBS.)
PM 3-4 1/4X5/16-24 .2500 .875 .375 .281 .500 1.875 5/16-24 1.250 13 3,467 .07
PM 4-5 5/16X3/8-24 .3125 1.000 .437 .344 .625 1.938 3/8-24 1.250 12 5,323 .11
PM 5-6 3/8X7/16-20 .3750 1.125 .500 .406 .719 2.125 7/17-20 1.375 10 7,180 .16
PM 6-7 7/16X1/2-20 .4375 1.312 .562 .437 .812 2.438 1/2-20 1.500 12 9,620 .25
PM 7-8 1/2X5/8-18 .5000 1.500 .625 .500 .937 2.625 5/8-18 1.625 10 12,807 .37
PM 8-10 5/8X3/4-16 .6250 1.750 .750 .562 1.125 2.785 3/4-16 1.750 13 16,565 .57
PM 10-12 3/4X7/8-14 .7500 2.000 .875 .687 1.312 3.375 7/8-14 1.875 12 22,843 .92
PM 12-14 1X1 1/4-12 1.000 2.750 1.375 1.000 1.875 5.125 1 1/4-12 1.125 17 43,541 2.13
PM 16